Olympian | Olympian Electric Series | Titleist | Vulcan | Centurion | Titan | Portable Pulling System
Laser Measuring Systems | Mechanical Measuring System

The Olympian Electric Series
  • Tough
  • Versatile
  • Fast
The Electric Series Does It All!
  • Length of deck 17 or 21 ft.
  • Width of deck 90"
  • Available with 3 to 6 towers
  • Make fast, precise repairs
  • Works well pulling unibodies and full frames
  • Works well with all popular measuring systems
  • Extra wide deck design
  • Removable cross members on each end
  • Pressure gauge at each tower
  • 10 built in pressurized air outlets
  • Simultaneous multiple pull capabilities
  • Reliable Enerpac hydraulics
  • Pendant controlled hydraulics for convenience
  • Lightweight removable ramps
  • Over 200 convenient tie down locations
  • Low pressure hydraulic system provides safety, and precise pulling
  • Height adjustable leveling standards
  • Pull out pinch weld heads with drive over bases
  • Newer detente style pinch weld clamps
  • All bolts can be operated with a 3/4 inch wrench
  • Make down pulls without using special adapters
  • Get our full frame truck holding for rock solid holding
  • See our complete line of accessories


Olympian-Red-Truck.jpg - 3740 Bytes
21 ft. Deck
Fast, precise repairs for
unibody or full frame vehicles.

  • 10 tons of pulling power
  • 1 1/2 hp. electric hydraulic pump
  • Low pressure hydraulics for safety and convenience

  • Repair unibody or full frame vehicles big or small on our E-5.

  • Electric Hydraulics
    Pendant controlled centralized hydraulics puts the power in your hands.

    Pinch Weld Clamps
    Positive lock pinch weld clamps. Fastest and easiest clamps around that feature length, width and height adjustment.

    Air Outlets
    Convenient pressurized air channels with 10 outlets for air tools and accessories.

    Removable Crossmembers
    Removable front and rear crossmembers for easy access. Better than closed end or oval designs.

  • Shut off valve and liquid filled pressure gauge provided at each tower for accurate control and safety.


    Tower pulling radius 360 degrees
    Deck length available 17 or 21 ft. - 3/4 in. plate
    Width of bed 90 inches
    Treadway width 24 inches
    Center opening 39 inches
    Distance between towers in length 23 to 26 feet
    Pinch weld height adjustment 8-1/4 to 12 inches
    Hydraulics, low pressure Enerpac
    15 ton rams
    10 tons pulling
    Stall size needed 14 x 24 ft. or 14 x 28 ft.


    Sliding Crossmember

    Full Frame Clamping System

    Power Lifting Bar

    Tool Board #1

    Tool Board #2

    Tool Board #3

    Tool Board #4

    Pro Gauge Package Includes:
    • Deluxe centerline gauges with magnets
    • Strut tower alignment gauge
    • Universal tram instrument

    Air Jack
    • Deluxe 2 and 3 bag air jacks by Rak Jak

    Click here to view the Olympian™
    About Us
    Our Products
    Request Information

    Gold Medallion Collision Repair
    800-424-8023 — 785-823-8800
    FAX: 785-823-8880
    E-MAIL: goldmed @ goldmedallion.com